This Body Mount Set contains the necessary body mounts and hardware for body to frame mounting. Bushings and sleeves are made from high quality rubber and materials for superior fitment, good durability and proper function.

• Made from top quality rubber to ensure durability and function.
• Reproduction body mounts designed from original parts.
• Twenty-four (24) piece Grade 5 hardware set included.

Product Note

Note: This set includes the Radiator Support bushings.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This twenty-six (26) piece Body Mount Set contains the necessary body mounts, radiator support mounting pads and alignment shims for body to frame mounting. Bushings and sleeves are made from high quality rubber and materials for superior fitment, good durability and proper function.

• Made from top quality rubber to ensure durability and function.
• Reproduction body mounts designed from original parts.
• Hardware not included.

Product Note

Note: The Radiator Support bushings are not included in this set.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Body Mount Set contains the necessary body mounts and hardware for body to frame mounting. Bushings and sleeves are made from high quality rubber and materials for superior fitment, good durability and proper function.

• Made from top quality rubber to ensure durability and function.
• Reproduction body mounts designed from original parts.
• Grade 5 hardware included.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Body Mount Set contains the necessary body mounts and hardware for body to frame mounting. Bushings and sleeves are made from high quality rubber and materials for superior fitment, good durability and proper function.

• Made from top quality rubber to ensure durability and function.
• Reproduction body mounts designed from original parts.
• Grade 5 hardware included.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Body Mount Set contains the necessary body mounts and hardware for body to frame mounting. Bushings and sleeves are made from high quality rubber and materials for superior fitment, good durability and proper function.

Fitment Note

Note: For 1967-1968 Chevrolet Full Size 2-Door Sedan and Hardtop models.

• Made from top quality rubber to ensure durability and function.
• Reproduction body mounts designed from original parts.
• Grade 5 hardware included.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Body Mount Set contains the necessary body mounts and hardware for body to frame mounting. Bushings and sleeves are made from high quality rubber and materials for superior fitment, good durability and proper function.

• Made from top quality rubber to ensure durability and function.
• Reproduction body mounts designed from original parts.
• Grade 5 hardware included.

Product Note

Note: The Radiator Support bushings are not included in this set.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Body Mount Set contains the necessary body mounts and hardware for body to frame mounting. Bushings and sleeves are made from high quality rubber and materials for superior fitment, good durability and proper function.

• Made from top quality rubber to ensure durability and function.
• Reproduction body mounts designed from original parts.
• Grade 5 hardware included.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Body Mount Set contains the necessary body mounts, radiator support mounting pads and alignment shims for body to frame mounting. Bushings and sleeves are made from high quality rubber and materials for superior fitment, good durability and proper function.

• Made from top quality rubber to ensure durability and function.
• Reproduction body mounts designed from original parts.
• Hardware not included.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Quarter Panel At Taillight End Filler Weatherstrip pair is designed from the original part for an authentic fit, finish, and appearance. This molded filler piece fits betwen the reat quarter panel of the vehicle and the taillight. This end filler installs with Phillips Pan head screws (not included).

• Fully molded with top quality EPDM rubber to ensure durability.
• Designed from original part so it fits correctly.
• Includes all factory style holes required for installation.
• Hardware not included.

This Quarter Panel At Taillight End Filler Weatherstrip pair is designed from the original part for an authentic fit, finish, and appearance. This molded filler piece fits betwen the reat quarter panel of the vehicle and the taillight. This end filler installs with Phillips Pan head screws (not included).

• Fully molded with top quality EPDM rubber to ensure durability.
• Designed from original part so it fits correctly.
• Includes all factory style holes required for installation.
• Hardware not included.

This Rear Quarter Window Gasket pair contains the left and right side weatherstrips for the two (2) large stationary glass windows on the rear quarter of the vehicle. They have vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

Fitment Note

Note: These quarter window weatherstrips fit Blazer or Jimmy with Single Wall Hardtop Only. It is a standard black gasket without trim groove. This application goes first on the glass and is installed using the rope-in method.

Single Wall Hardtop - The bolts for the top are inserted from the TOP down. Also Single Wall Hardtop's have interior lights.

• Fitted gasket provides a formed, seamless seal.
• Designed from original part so it fits correctly.
• LH and RH side gaskets.
• We recommend for installation: Windshield and Body Sealant 96-8509-96.

Add our Rope-In Glass Installation Kit, 90-3357-90 to your order and have everything you need to install this part.

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

Installation Assistance

• 

  Installation Instruction PDF

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Headlight To Grill Welt pair is designed from the original part for an authentic fit, finish, and appearance. Filler strips attach to the left and right headlights to fit between the headlights and the grill on each side.

Replace worn, tattered and deteriorated with age original grill welts with this direct fit, like OEM reproduction.

• Fully molded with top quality EPDM rubber to ensure durability and proper function.
• Designed from original part so it fits correctly.
• Replaces factory #4882724 (RH) and #4882725 (LH).

Made with Top Quality Rubber.

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Headlight To Grill Welt pair is designed from the original part for an authentic fit, finish, and appearance. Filler strips attach to the left and right headlights to fit between the headlights and the grill on each side.

Replace worn, tattered and deteriorated with age original grill welts with this direct fit, like OEM reproduction.

• Fully molded with top quality EPDM rubber to ensure durability and proper function.
• Designed from original part so it fits correctly.
• Replaces factory #4882724 (RH) and #4882725 (LH).

Made with Top Quality Rubber.

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. Push-on type door weatherstrips mount directly to the body pinchweld and fits either the left or right side. These door weatherstrips will also fit the left rear or right rear side on 4-Door model vehicles.

Superior grade, 100% EPDM rubber extrusion designed to last- it will not fade, shrink or crack. Excellent at resisting moisture, Ozone and UV exposure.

• Made of top quality dense and sponge EPDM rubber to ensure a durable positive seal.
• Weatherstrips are a push-on style for easy mounting directly to the body.
• No adhesive is required for installation.
• Installation may require minor trimming of length for your vehicle’s best fit.
• Order two (2) pairs for all four (4) doors.

This Windshield Molding is designed from the original part for superior fitment. This upper windshield underside molding mounts with peel-n-stick tape.

• Made from ozone resistant PVC.
• Designed from original part so it fits correctly.
• A reproduction manufactured to OEM specifications.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. Push-on type door weatherstrips mount directly to the body pinchweld and fits either the left or right side.

Superior grade, 100% EPDM rubber extrusion designed to last- it will not fade, shrink or crack. Excellent at resisting moisture, Ozone and UV exposure.

Fitment Note

Note: These door gaskets fit 4-Door Extended Cab Pickups.

• Made of top quality dense and sponge EPDM rubber to ensure a durable positive seal.
• Weatherstrips are a push-on style for easy mounting directly to the body.
• No adhesive is required for installation.
• Installation may require minor trimming of length for your vehicle’s best fit.

This Fuel Tank Filler Neck Hose is designed from the original part for superior fitment and function. This fuel resistant rubber hose set connects the rear fuel tank to the filler pipe.

Fitment Note

Note: For F100 / 350 trucks with Styleside / Fleetside bed.

Made with Top Quality Fuel Resistant Rubber.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This fully molded Door Bumper is quality reproduction of the original factory part. This rubber bumper attaches to the vehicle body to support / cushion the door closure.

Fitment Note

Note: Usually requires two (2) bumpers each on 2-Door models.

• Fully molded with top quality EPDM rubber.
• Designed from original part so it fits correctly.

This four (4) piece Bumper Guard Inserts Set is designed from the original part for an authentic fit, finish, and appearance. Front and rear bumper guard inserts attach to the deluxe style steel vertical bumper guard with mounting hardware.

Quality molded rubber with steel core for an exact fit. Replace worn and deteriorated original bumper guard inserts with these direct fit like OEM reproductions.

• Made from top quality rubber to ensure durability and function.
• Designed from original part so it fits correctly.

This four (4) piece Bumper Guard Inserts Set is designed from the original part for an authentic fit, finish, and appearance. Front and rear bumper guard inserts attach to the deluxe style steel vertical bumper guard with mounting hardware.

Quality molded rubber with steel core for an exact fit. Replace worn and deteriorated original bumper guard inserts with these direct fit like OEM reproductions.

• Made from top quality rubber to ensure durability and function.
• Designed from original part so it fits correctly.

This Cowl To Glass Molding is designed from the original part for superior fitment. This molding mounts to the cowl and creates a seal against the width of the glass.

• Made from ozone resistant PVC.
• Designed from original part so it fits correctly.
• A reproduction manufactured to OEM specifications.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

These Side Window Glass Run Channels fit two (2) and four (4) door sedans and wagons. Channels come in a pair for both sides of the vehicle. These direct-fit channels press into the top and back of the door with weatherstrip adhesive (not included).

• Made from premium quality, ozone resistant materials.
• Designed from original part so it fits correctly.
• Specifically designed to fit your vehicle.

Add our Weatherstrip General Installation Kit, 90-3355-90 to your order and have everything you need to install this part.

Made from fuel resistant rubber this Fuel Tank Vapor Valve Grommet seals the Fuel Vapor Valve to the fuel tank.

Outside Diameter: 1.771" inches
Seal Surface Diameter: 1.181" inches
Inside Diameter: 0.984"inches

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Fuel Tank To Filler Pipe Hose is designed from the original part for superior fitment and function. This fuel resistant rubber hose connects the fuel tank to the filler pipe. No hardware included.

Dimensions

• Outside Diameter: 2-5/8" Inches
• Inside Diameter: 2-1/4" Inches
• Length: 4" Inches

Made with Top Quality Fuel Resistant Rubber.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This small Rear Door Glass Vertical Post Run Channel is designed from the original part for superior fitment and seal. The small channel simply presses into the division post towards the small, fixed stationary vent glass. This single piece fits either the left or right side of the rear door.

Made with Top Quality Materials.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

This part is not manufactured by Steele Rubber Products and ships direct from the supplier. *All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Rear Door Glass Run Channel is designed from the original part for superior fitment and seal. The glass run channel simply presses into the front of the rear door glass, across the top of the rear door glass and rear vent window, and then down the back side of the rear vent window.

Fitment Note

Note This single piece channel fits the Right - Passenger side rear door only.

• Made from top quality materials to ensure durability and proper function.
• Designed from original part so it fits correctly.

This Rear Door Glass Run Channel is designed from the original part for superior fitment and seal. The glass run channel simply presses into the front of the rear door glass, across the top of the rear door glass and rear vent window, and then down the back side of the rear vent window.

Fitment Note

Note This single piece channel fits the Left - Driver side rear door only.

• Made from top quality materials to ensure durability and proper function.
• Designed from original part so it fits correctly.

This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. This weatherstrip mounts directly into the trunk channel with the top lip pointed outward to create a watertight seal when the trunk is closed. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

Trunk weatherstrip is made from superior grade, 100% EPDM sponge rubber extrusion designed to last- it will not fade, shrink or crack. It is excellent at resisting moisture, Ozone and UV exposure. Optimal for replacing old, worn or damaged trunk gaskets.

Fitment Note

Note: This trunk weatherstrip has a 3M Peel-N-Stick adhesive strip for an easier installation. If full originality is desired 70-0028-84 is an exact copy of the glue-on original.

• Twelve foot (12') strip provides complete coverage. Installation may require trimming length to fit.
• End-to-end bonding, if desired, can be done with our Loctite Super Bonder 495, 96-0495-96 to make a one-piece weatherstrip.
• A non-original replacement for factory #9825829.

This Lower Door Weatherstrip pair is designed from the original part for superior fitment and seal. These lower door weatherstrips use pre-attached plastic retainers to install on the lower edge of the doors. Improved design helps seal out wind and rain.

• Made of high-quality EPDM sponge rubber with the correct profile and proper molded ends to ensure a durable positive seal.
• A direct fit reproduction designed from the original for an exact part.
• Accurately installed pins for easy installation.
• Sold as a pair to seal the driver (LH) and passenger (RH) doors.
• Replaces factory #G5ZZ-6320530 and #7R3Z-63205521-B on S197 Mustang models.

This Removable Hardtop Roof To Quarter Panel Weatherstrip pair is designed from the original part for superior fitment and seal. This Left and Right side weatherstrip pair attaches to the removable hardtop to seal between the hardtop roof side panels and to the bed top.

• Reproduction designed from the original part so it fits correctly.
• Made from top quality rubber with steel reinforced bolt holes to ensure durability and a proper seal.
• Fully molded and reinforced quality end pieces.
• Left and Right pieces that screws directly to the vehicle body.

This Tailgate Glass Lower Bumper pair is designed from the original part for an authentic fit, finish, and appearance. These bumper stops install in the lower tailgate to cushion the glass when lowered down.

Made with Top Quality Rubber.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Tailgate Handle Mounting Plate Pad is designed from the original part for superior fitment and function.

Installs between the tailgate handle mounting plate and the tailgate.

• Precision die-cut from top quality flat rubber to ensure durability and proper function.
• Reproduction is designed from the original part to fit correctly.
• Includes all factory style holes required for installation.
• Pad does not have an edge bead.
• Mounting plate and hardware not included.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Air Vent Duct Gasket pair is designed from the original part for an authentic fit, finish and appearance. These die-cut foam gaskets are used with steel air vent ducts.

Fitment Note

Note: Use with Steel Air Vent Ducts, except with Fresh Air Heater.

• Sold as a pair.
• Die cut from quality foam rubber.
• Factory mounting holes.
• Takes one (1) or two (2) gaskets per vehicle.
• No hardware included.

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

A pair of Sun Visor Arm and Bracket Pads designed from the original part for superior fitment and function. These pads mount between the sun visor and body on the left and right sides. Provides a fresh update for the truck cabin.

• Two (2) molded rubber pads with bead gives a clean finished look.
• Mounts between sun visor and body.
• Protects the interior paint.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Fuel Tank Filler Neck Hose is designed from the original part for superior fitment and function. This fuel resistant rubber hose set connects the midship fuel tank to the filler pipe.

Fitment Note

Note: For F100 / 350 trucks with midship fuel tank (tank in front of the rear axle) and without emission hole on fuel tank. Fits trucks with 6' foot or 8' foot Styleside / Fleetside bed. Will not fit trucks with a body lift.

Dimensions

Filler Hose:

• Overall Length: 18-1/2" Inches
• Inner Diameter: 2-1/8" Inches
• Outer Diameter: 2-5/8" Inches

Vent Hose:

• Overall Length: 17-1/2" Inches
• Inner Diameter: 5/8" Inch
• Outer Diameter:7/8" Inch

Metal Shield:

• Length: 5-1/2" Inches
• Width: 3-1/4" Inches
• Thick: Adjustable

Made with Top Quality Fuel Resistant Rubber.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Fuel Tank To Filler Pipe Grommet is designed from the original part for superior fitment and seal. This fuel resistant rubber grommet fits to seal the filler pipe into the fuel tank connection.

• Fully molded from top quality fuel resistant rubber to ensure durability and proper seal.
• Reproduction is designed from original part so it fits correctly.
• No hardware included.

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Fuel Tank To Filler Pipe Seal is designed from the original part for superior fitment and seal. This part fits around the vehicle fuel filler pipe where the filler pipe enters the fuel tank.

• Fully molded from top quality rubber to ensure durability and proper seal.
• Reproduction is designed from original part so it fits correctly.
• No hardware included.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Fuel Tank To Filler Pipe Hose is designed from the original part for superior fitment and function. This fuel resistant rubber hose connects the fuel tank to the filler pipe. Infused webbing for strength. No hardware included.

Dimensions

• Inside Diameter: 1-3/4" Inches
• Length: 8-7/8" Inches

Made with Top Quality Fuel Resistant Rubber.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Fuel Tank Filler Pipe Grommet is designed from the original part for superior fitment and seal. This fuel resistant rubber grommet fits around the vehicles fuel filler pipe between the filler neck and vehicle body.

Dimensions

• Outside Diameter: 3-1/16" Inches
• Outside Recessed Groove: 2-1/2" Inches
• Inside Diameter: 1-9/16" Inches
• Inside Recessed Opening: 2-1/4" Inches
• Height: 5/8" Inches

Made with Top Quality Fuel Resistant Rubber.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Fuel Tank To Filler Pipe Hose is designed from the original part for superior fitment and function. This fuel resistant rubber hose connects the fuel tank to the filler pipe. No hardware included.

Dimensions

• Outside Diameter: 2-3/8" Inches
• Inside Diameter: 2" Inches
• Length: 5" Inches

Made with Top Quality Fuel Resistant Rubber.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Fuel Tank Filler Hose is designed from the original part for superior fitment and function. This molded fuel resistant rubber hose connects the fuel tank to the filler pipe.

• A molded reproduction designed from original part so it fits correctly.
• No hardware included.

Made with Top Quality Fuel Resistant Rubber.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body.

Fitment Note

Note: For Single or Dual fuel tanks.

• Fully molded from top quality fuel resistant rubber to ensure durability and proper seal.
• Reproduction is designed from original part so it fits correctly.

Dimensions

Inside Diameter: 2-3/16" Inches
Outside Diameter: 3-1/2" Inches

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body.

• Reproduction designed from original part so it fits correctly.
• Made from top quality EPDM sponge rubber to ensure durability and proper seal.
• An easy to install part with pre-installed push pins. No glue adhesive needed.

This Upper Door Drip Rail Weatherstrip pair is designed from the original part for an authentic fit, finish, and function. The weatherstrip has a flexible steel spine encased in rubber so it won't rust like inferior alternatives. The attached edge form is molded on and maintains shape and sponge density for a proper seal.

• Made from top quality materials to ensure durability and proper function.
• Designed from original part so it fits correctly.

Installation Note

Note: These push-on weatherstrips fit to the pinchweld seam above the front doors. The short length weatherstrip from the pair goes above the Left-Driver side entry door then running down the windshield A-Pillar post. The longer length weatherstrp from the pair goes above the Right-Passenger side sliding door and entry door then running the windshield A-Pillar post.

This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body.

• Made from top quality EPDM dense rubber to ensure durability and proper seal.
• Reproduction designed from original part so it fits correctly.
• Includes six (6) pre-installed metal retaining clips for easy installation.

This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay directly to the body.

• Made from top quality EPDM dense rubber to ensure durability and proper seal.
• Reproduction designed from original part so it fits correctly.
• Includes five (5) pre-installed metal retaining clips for easy installation.

This reproduction Tailgate Lock Base Gasket is die-cut from quality materials to the original design for superior performance, durability, and a factory like fit.

Commonly used during a vehicle re-paint.

• Reproduction is designed from the original part to fit correctly.
• Includes all factory style holes required for installation.
• No hardware included.
• Replaces factory #J5465676.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Rear Liftgate Bumper is designed from the original part for superior fitment, finish and function. This bumper fits on the liftgate and is made from high quality ozone resistant EPDM rubber.

This is sold as a single piece. Includes plastic washer.

This Front Door Glass Run Channel is designed from the original part for superior fitment and function. The glass run channel simply presses into the top and back section of the door channel.

Fitment Note

Note This single piece channel fits the Left - Driver side front door only.

• Made from top quality materials to ensure durability and proper function.
• Designed from original part so it fits correctly.

This Rear Door Division Post Glass Run Channel is designed from the original part for superior fitment and seal. This glass run channel simply presses into the vent window division post. This single piece fits either the driver or the passenger side rear door.

Made with Top Quality Materials.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

This part is not manufactured by Steele Rubber Products and ships direct from the supplier. *All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This reproduction Door Lock Gasket is molded from quality materials to the original design for superior performance, durability, and a factory like fit.

Commonly used during a vehicle re-paint. Sold as one (1) each.

• Reproduction is designed from the original part to fit correctly.
• Quality item with raised edge to center the door lock.
• No hardware included.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This push-on weatherstrip mounts on the body of the vehicle to seal against the tailgate when closed.

Made from high quality ozone resistant EPDM rubber to the original specifications.

• Designed from original part so it fits correctly.
• Replaces factory #J5451573.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Rear Window Gasket w/o Trim Groove is designed from the original part for superior fitment and seal. It is a standard black gasket without trim groove. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish. This weatherstrip mounts around the full perimeter of the rear window glass for a precise, factory fit.

• Fitted gaskets provides a formed, seamless seal.
• Designed from original part so it fits correctly.

The rear window glass weatherstrip goes first on the glass and is installed using the rope-in method.

Add our Rope-In Glass Installation Kit, 90-3357-90 to your order and have everything you need to install this part.

Made with Top Quality Rubber.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

Accessories

• 

  Black Windshield and Body Sealant

• 

  Scraper/Tuck Tool

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Quarter Window Weatherstrip without Trim Groove pair is designed from the original part for superior fitment and seal. It is a standard black gasket without trim groove. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish. This weatherstrip mounts around the full perimeter of the quarter glass for a precise, factory fit.

• Fitted gaskets provides a formed, seamless seal.
• Designed from original part so it fits correctly.
• Fits Left and Right Rear Quarter Window fixed, stationary glass.

The quarter glass weatherstrip goes first on the glass and is installed using the rope-in method.

Add our Rope-In Glass Installation Kit, 90-3357-90 to your order and have everything you need to install this part.

Made with Top Quality Rubber.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

Accessories

• 

  Black Windshield and Body Sealant

• 

  Scraper/Tuck Tool

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Front Door Glass Run Channel is designed from the original part for superior fitment and function. The glass run channel simply presses into the top and back section of the door channel.

Fitment Note

Note This single piece channel fits the Left - Driver side door on 2-Door models only.

• Made from top quality materials to ensure durability and proper function.
• Designed from original part so it fits correctly.

This Front Door Glass Run Channel is designed from the original part for superior fitment and function. The glass run channel simply presses into the top and back section of the door channel.

Fitment Note

Note This single piece channel fits the Right - Passenger side front door only.

• Made from top quality materials to ensure durability and proper function.
• Designed from original part so it fits correctly.

This Front Door Division Post Glass Run Channel is designed from the original part for superior fitment and seal. This glass run channel simply presses into the vent window division post. This single piece fits either the driver or the passenger side front door.

Made with Top Quality Materials.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

This part is not manufactured by Steele Rubber Products and ships direct from the supplier. *All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Side Window Stop Bumper is designed from the original part for an authentic fit, finish, and appearance. This smaller (1/2 inch) bumper fits into the lower run channel at the front and is the down stop for the door glass.

Fitment Note

Note: One large (70-4930-62) and one small (70-4942-62) stop bumper per door are required for most 1968-1972 GM A-Body models. See 90-3743-90 for a four (4) piece set of two (2) large and two (2) small bumper stops to complete two (2) doors.

Made with Top Quality Rubber.

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Side Window Stop Bumper is designed from the original part for an authentic fit, finish, and appearance. This larger (7/8 inch) bumper fits into the lower run channel at the rear and is the down stop for the door glass.

Fitment Note

Note: One large (70-4930-62) and one small (70-4942-62) stop bumper per door for most 1968-1972 GM A-Body models. See 90-3743-90 for a four (4) piece set of two (2) large and two (2) small bumper stops to complete two (2) doors.

Made with Top Quality Rubber.

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Door Hinge Bumper Set is a quality reproduction of the original factory part. These sixteen (16) rubber bumpers attach four (4) per door to cushion the door closure action.

• Fully molded with top quality EPDM rubber to ensure durability and proper function.
• Designed from original part so it fits correctly.
• Bumpers measures 13/16" inches in diameter.
• Push-in installation.
• Requires four (4) bumpers per door, one (1) set per vehicle.

This Door Hinge Bumper Set is a quality reproduction of the original factory part. These sixteen (16) rubber bumpers attach four (4) per door to cushion the door closure action.

• Fully molded with top quality EPDM rubber to ensure durability and proper function.
• Designed from original part so it fits correctly.
• Bumpers measures 13/16" inches in diameter.
• Push-in installation.
• Requires four (4) bumpers per door, one (1) set per vehicle.

This Quarter Window Weatherstrip End Filler pair is designed from the original part for an authentic fit, finish, and function. Filler strips install at rear on inner panel at back end of the quarter window beltlines on convertible models.

• Fully molded with top quality EPDM rubber over corrosion resistant brass cores to ensure durability and proper function.
• Designed from original part so it fits correctly.
• No Hardware Included.
• Replaces factory #4510038 (RH) and #4510039(LH).

This Quarter Window Weatherstrip End Filler pair is designed from the original part for an authentic fit, finish, and function. Filler strips install at rear on inner panel at back end of the quarter window beltlines on convertible models.

• Fully molded with top quality EPDM rubber over corrosion resistant brass cores to ensure durability and proper function.
• Designed from original part so it fits correctly.
• No Hardware Included.
• Replaces factory #4510038 (RH) and #4510039(LH).

This Quarter Window Weatherstrip End Filler pair is designed from the original part for an authentic fit, finish, and function. Filler strips install at rear on inner panel at back end of the quarter window beltlines on convertible models.

• Fully molded with top quality EPDM rubber over corrosion resistant brass cores to ensure durability and proper function.
• Designed from original part so it fits correctly.
• No Hardware Included.
• Replaces factory #4510038 (RH) and #4510039(LH).

This Instrument Bezel To Bezel Glass Seal is designed from the original part for superior fitment and seal. This part seals the glass to the Instrument Panel / Bezel.

• Made from top quality rubber to ensure durability and proper seal.
• Designed from original part so it fits correctly.
• Made from 1/4" round sponge rubber at twenty-one (21") inches.

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Three Door Weatherstrip Set is designed for a superior fitment and seal. This 3-piece set fits both front doors and the rear passenger side 3rd door.

These weatherstrips mount on the pinchweld of the body to seal the full perimeter of the doors against the truck body when the door is closed. Manufactured from premium quality OEM grade, ozone resistant materials.

• Made of premium dense and sponge EPDM rubber to ensure a durable positive seal.
• Made with molded corners for a superior fit.
• Weatherstrips are a push-on style for easy mounting directly to the body.
• No adhesive is required for installation.

This Three Door Weatherstrip Set is designed from the original part for superior fitment and seal. This 3-piece set fits both front doors and the rear passenger side 3rd door.

These weatherstrip mount (glue-on) directly to the body sealing the full perimeter of the doors against the truck body when the door is closed. Manufactured from high quality ozone resistant EPDM rubber.

• Made of high quality EPDM sponge rubber with molded corners to ensure a durable positive seal.
• A reproduction designed from the original for an exact part.
• Adhesive not included.

Add our Weatherstrip General Installation Kit, 90-3355-90 to your order and have everything you need to install this set.

This Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" masticated rubber to authentic original dimensions.

Replace missing or worn originals with these quality reproductions.

Fitment Note

Note: Fits 4-Wheel Drive models with ZR2 Package only.

• Left and Right pieces attach to the inner fenders over the suspension upper a-arms.
• Includes all factory style holes required for installation.
• Die cut from correct 3/32" heavy duty masticated rubber.
• Keeps dirt and road debris from getting into engine bay.
• Installation hardware included.

This Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" masticated rubber to authentic original dimensions.

Replace missing or worn originals with these quality reproductions.

• Left and Right pieces attach to the inner fenders over the suspension upper a-arms.
• Includes all factory style holes required for installation.
• Die cut from correct 3/32" heavy duty masticated rubber.
• Keeps dirt and road debris from getting into engine bay.
• Installation hardware included.

This Front Fender Splash Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" masticated rubber to authentic original dimensions.

Replace missing or worn originals with these quality reproductions.

• Left and Right pieces fit inside the front inner fenders.
• Includes all factory style holes required for installation.
• Die cut from correct 3/32" heavy duty masticated rubber.
• Keeps dirt and road debris from getting into engine bay.
• Installation hardware included.

Hand Crafted. Quality Manufactured. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

These two (2) piece Radiator Side Fillers are designed from the original part for superior fitment and function. Replace missing or worn originals with these American Made reproductions.

• Manufactured from high quality, correct 3/32" thick masticated rubber for a factory appearance.
• Made to original specifications.
• Includes all factory style holes required for installation.
• Attaches to sides of core support to help funnel air into radiator.
• Two (2) piece filler set for both driver (LH) and passenger (RH) sides of radiator.

Hand Crafted. Quality Manufactured. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Radiator Side Air Baffle pair is designed from the original part for superior fitment and function. Left and Right baffles are die cut from quality 3/32” masticated rubber to authentic original dimensions.

Baffle pieces attach to the core support at the sides of the radiator.

• Made to original specifications for an authentic fit and appearance.
• Die cut from original style 3/32" masticated rubber.
• Includes all factory style holes required for installation.
• Installation clips included.
• Replaces factory #1618829.

Hand Crafted. Quality Manufactured. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This two (2) piece Radiator Core Support Filler set is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" masticated rubber to authentic original dimensions. Replace missing or worn originals with these American Made reproductions.

• Manufactured from high quality, correct 3/32" thick masticated rubber for a factory appearance.
• Made to original specifications.
• Includes all factory style holes required for installation.
• Attaches to sides of core support to help funnel air into radiator.
• Two (2) piece filler set for both driver (LH) and passenger (RH) sides of radiator.

Hand Crafted. Quality Manufactured. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This high-quality materials eight (8) piece Window Felt and Run Channel Weatherstrip set includes the CHROME style window felt beltline weatherstrips that wipe the side windows when the glass is lowered as well as the glass run channels that holds the glass in place.

Fitment Note

Note: This eight (8) piece weatherstrip set is for models with a CHROME beltline molding. This set does rear doors. For Black rear door moldings see 70-3936-58.

This high-quality materials eight (8) piece Window Felt and Run Channel Weatherstrip set includes the CHROME style window felt beltline weatherstrips that wipe the side windows when the glass is lowered as well as the glass run channels that holds the glass in place.

Fitment Note

Note: This eight (8) piece weatherstrip set is for models with a CHROME beltline molding. This set does rear doors. For Black rear door moldings see 70-3936-58.

This high-quality materials eight (8) piece Window Felt and Run Channel Weatherstrip set includes the BLACK style window felt beltline weatherstrips that wipe the side windows when the glass is lowered as well as the glass run channels that holds the glass in place.

Fitment Note

Note: This eight (8) piece weatherstrip set is for models with a BLACK beltline molding. This set does rear doors. For Chrome rear door moldings see 70-3937-58.

This high-quality materials eight (8) piece Window Felt and Run Channel Weatherstrip set includes the BLACK style window felt beltline weatherstrips that wipe the side windows when the glass is lowered as well as the glass run channels that holds the glass in place.

Fitment Note

Note: This eight (8) piece weatherstrip set is for models with a BLACK beltline molding. This set does rear doors. For Chrome rear door moldings see 70-3937-58.

This high-quality materials eight (8) piece Window Felt and Run Channel Weatherstrip set includes the BLACK style window felt beltline weatherstrips that wipe the side windows when the glass is lowered as well as the glass run channels that holds the glass in place.

Fitment Note

Note: This eight (8) piece weatherstrip set is for models with a BLACK beltline molding. This set does both driver and passenger front doors. For Chrome front door moldings see 70-4700-58.

This high-quality materials eight (8) piece Window Felt and Run Channel Weatherstrip set includes the BLACK style window felt beltline weatherstrips that wipe the side windows when the glass is lowered as well as the glass run channels that holds the glass in place.

Fitment Note

Note: This eight (8) piece weatherstrip set is for models with a BLACK beltline molding. This set does both driver and passenger front doors. For Chrome front door moldings see 70-4700-58.

This Fuel Filler Neck Gasket is designed from the original part for superior fitment and seal. Machine stamped from quality materials to authentic original dimensions.

Fitment Note

Note: Fits Chevrolet Fleetside and GMC Wideside truck models only.

• Made to original specifications for an authentic fit.
• Includes all factory style holes required for installation.

Hand Crafted. Quality Manufactured. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. Push-on type door weatherstrips mount directly to the body pinchweld to seal against the full perimeter of the door when closed.

Superior grade, 100% EPDM rubber extrusion designed to last- it will not fade, shrink or crack. Excellent at resisting moisture, Ozone and UV exposure.

Fitment Note

Note: A Front Door Weatherstrip pair with molded corners for D-Series Pickup or Travelall (Front Doors Only).

• Two (2) twelve feet - three inch (12'-3") overall length strips provide complete coverage for both front doors. Installation may require minor trimming of length for best fit to the vehicle.
• Made of top quality dense and sponge EPDM rubber to ensure a durable positive seal.
• Weatherstrips are a push-on style for easy mounting directly to the body.
• No adhesive is required for installation.

This Side Cargo Door Weatherstrip pair is designed from the original part for superior fitment and seal. These weatherstrips mount (peel-n-stick) directly to the left (rear) and right (front) side cargo doors sealing the full perimeter of the doors against the vehicle body when the door is closed.

• Made of high-quality EPDM sponge rubber with molded ends to ensure a durable positive seal.
• A reproduction designed from the original for an exact part.
• LH and RH Side Cargo Doors.
• Easy installation with self adhesive peel-n-stick.
• Replaces factory #E9UZ-1525324-B and #E9UZ-1525325-B.

This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight lens and taillight housing bezel in each bumper end.

• Made to original specifications for an authentic fit and appearance.
• High quality weather, UV and ozone resistant EPDM sponge rubber for maximum longevity.
• Sold as a pair for both driver (LH) and passenger (RH) side taillights.
• For the taillights in the bumper ends.
• Fits between the lens and housing.
• Factory style holes required for installation.
• Hardware not included.

This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.

Left and Right pieces fit over suspension upper a-arms and inside front inner fenders.

• Die cut from original 3/32" heavy duty masticated rubber.
• Attaches to the inner fenders over the upper a-arms.
• Keeps dirt and road debris from getting into the engine bay.
• Includes all factory style holes required for installation.
• Installation clip hardware included.

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Rear Split Small Glass Window Gasket mounts around the full perimeter of the rear back glass for a precise, factory fit. This gasket is manufactured from ozone resistant EPDM rubber and to OEM specifications as the original for an authentic fit, finish and function.

Fitment Note

Note: This gasket is for Truck models with two (2) small split rear windows. Two (2) gaskets are required per vehicle. It is a standard black gasket without a trim groove.

• Fitted gasket provides a formed, seamless seal.
• Designed from original part so it fits correctly.
• We recommend for installation: Windshield and Body Sealant 96-8509-96.

Add our Rope-In Glass Installation Kit, 90-3357-90 to your order and have everything you need to install this part.

Hand Crafted. Quality Manufactured. Guaranteed to Fit.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

Accessories

• 

  Black Windshield and Body Sealant

• 

  Scraper/Tuck Tool

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Hardtop Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with fully molded ends and metal cores for a factory like fit. These weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.

• Made from top quality rubber with steel core end pieces to ensure durability and a proper seal.
• Reproduction designed from the original part so it fits correctly.
• Left and Right pieces that glues and screws directly to the vehicle body.

Add our Weatherstrip General Installation Kit, 90-3355-90 to your order and have everything you need to install this part.

This Cradle Splash Shield Filler is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" masticated rubber to authentic original dimensions.

Installs on the cradle near the muffler.

Fitment Note

Note: For Manual Transmission models ONLY.

• A die cut filler piece for a correct factory like fit.
• Includes factory style holes required for installation.
• Push-in clip installation hardware included.

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Cradle Splash Shield Filler is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" masticated rubber to authentic original dimensions.

Installs on the cradle near the muffler.

Fitment Note

Note: For Manual Transmission models ONLY.

• A die cut filler piece for a correct factory like fit.
• Includes factory style holes required for installation.
• Push-in clip installation hardware included.

Hand Crafted. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Kick Panel Vent Gasket pair is designed from the original part for superior fitment and function.

Fitment Note

Note: Can be used on trucks with or without A/C.

• Made from original specifications for an authentic fit and appearance.
• Includes all factory style holes required for installation.
• Sold as a pair.

Hand Crafted. Quality Manufactured. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Cowl End Weatherstrip pair is designed from the original part for superior fitment and function.

• Die cut from correct sponge rubber.
• Made to original specifications for an authentic fit and appearance.
• High quality weather, UV and ozone resistant EPDM rubber for maximum longevity.
• Sold as a pair RH and LH.

Hand Crafted. Quality Manufactured. Guaranteed to Fit. Made in USA.

Please check the Matching Vehicles tab to confirm this part is applicable to your vehicle.

*All parts sold by Steele Rubber Products are backed by our 100% Satisfaction Guarantee! Learn more!

This Taillight Lens Gasket set is designed from the original part for superior fitment and seal. Six (6) reproduction gaskets fit between taillight lens and taillight housing bezel.

• Die cut from top quality correct rubber-cork material to ensure durability and proper seal.
• Six (6) piece kit for all six (6) lights.
• Made to original specifications for an authentic fit and appearance.
• Includes all factory style holes required for installation.
• No hardware included.

This Taillight Housing To Body Gasket Set is designed from the original part for superior fitment and sealing. These six (6) reproduction gaskets fit between taillight frame housing and the body.

• Die cut from top quality original style materials to ensure durability and proper seal.
• Sold as a six (6) piece gasket set.
• Made to original specifications for an authentic fit and appearance.
• No hardware included.